Ferty® - Standard - ammonium accentuated fertilizers




Ferty Standard products are ammonium acentuated and therefore ideal for the use in watering water with an acid capacity of > 4.3 mmol/l.

When the plants absorb the ammonium nitrogen, H+ ions arise. These ions cause a physiologically acid effect which counteracts the increasing of the pH-value.

The Ferty Standard products are especially suitable for the use with cultures which need a low pH-value. All Ferty fertilizers can also be used for foliar application. A lower concentration (0.5 ‰ = 50 g / 100 l ) should be used then.

All Ferty products dissolve fast and without residues. Iron, copper, manganese and zinc are chelated in the form of EDTA and very well available to the plants.

For more information on each product, just click on it.

FERTY® 1 Red 20+7+10 (+2)
Ferty 1

FERTY® 1 is a nitrogen accentuated fertilizer acting physiologically
acid due to the high part of ammonium nitrogen. This leads to pH
lowering in the soils and substrates which is counteracting pH rising
due to harder water




Macronutrients:
Trace-elements:
20 % N
total nitrogen
0.020 % B
boron
- 8.5 % NO3-N
- nitrate nitrogen
0.030 % Cu
copper*
- 11.5 % NH4-N
- ammonium nitrogen
0.075 % Fe
iron*
7 % P2O5
water-soluble phosphate
0.050 % Mn
manganese*
10 % K2O
water-soluble potassium oxid
0.001 % Mo
molybdenum
2 % MgO
water-soluble magnesium oxid
0.010 % Zn
zinc*

* = EDTA chelated

Application fields:
- fertirrigation and foliar application in the stage of growth
- ideal for acid loving plants: azalea, erica, heather, rhododendron, camellia and so on
- foliage plants, nurseries and young plants in the stage of growth
- when increased nitrogen supply is needed (nutrients deficiency, transplantation shock)
- irrigation with hard water

Dosage:
Heather, azaleas, rhododendrons, callunas: 0,5 - 2 ‰ ( 50 - 200 g/100 liter of water). Green plants, such as asparagus cissus, monsteras, hederas, philodendrons, farns, ficus, dracaenas, yuccas : 0,5 - 2 ‰
Flowering pot plants and transplanted cut flowers such as euphorbias, poinsettias, chrysanthemums, begonias: 1 - 2 ‰
Fertilization in nurseries: 0,5 - 2 ‰
Vegetables: 0,3 - 0,8 ‰ depending on the cultures and the stage of growth

EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1,5 ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,8 1,5 2,3 3,0 11 45 73 140

Packing:

25 kg plastic sacks. Keep dry!
FERTY® 2 Blue 15+5+25 (+2)
Ferty 2

FERTY® 2 is a mineral fertilizer with a high K2O content and without ballast. Physiologically acid effect with a high nitrate content and therefore an ideal means of supplying nitrogen at low temperatures.





Macronutrients:
Trace-elements:
15 % N
total nitrogen
0.020 % B
boron
- 8.5 % NO3-N
- nitrate nitrogen
0.030 % Cu
copper*
- 6.5 % NH4-N
- ammonium nitrogen
0.075 % Fe
iron*
5  % P2O5
water-soluble phosphate
0.050 % Mn
manganese*
25 % K2O
water-soluble potassium oxid
0.001 % Mo
molybdenum
2 % MgO
water-soluble magnesium oxid
0.010 % Zn
zinc*

* = EDTA chelated

Application fields:

- ornamental plant growing: for stock plants, cut flowers and pot plants in the developed and selling phase
- for cultivations demanding a high K2O content in the flowering stage
- nurseries: for the final fertilizing of matureing plants
- vegetable growing: for the fertirrigation of vegetables in greenhouses.

Application:

- ornamental plant growing: Carnations, chrysanthemums, gerberas and roses: 1 - 3 ‰ (100 - 300 g/100 litres water);
- saintpaulias, gloxinias, streptocarpus etc.: 0,5 - 1,5 ‰,
- fertirrigation :0,3 - 0,6 ‰.
- cyclams: 0,5 - 2 ‰ ( depending on the dimensions of the pot)
- for all bed and balcony plants such as fuchsias, petunias, salvias, ageratum, tagetes, etc. in the sales period and in order to harden the plants: 1 - 2 ‰.
- for stock plants and well-developed cuttings and for final fertilizing in nurseries: 1 - 2 ‰.
- vegetables: Ideal for tomatoes, cucumbers, paprika etc.; trickle irrigation: 1 - 2 ‰.


EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1,5 ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,7 1,4 2,1 2,7 11 46 76 151

Packing:

25 kg plastic sacks. Keep dry!

FERTY® 3 Green 15+10-15 (+2)
Ferty 3

FERTY® 3 is balanced NPK fertilizer without ballast, physiologically acid effect. Universal fertilizer for all cultivations in the growing period 




Macronutrients:
Trace-elements:
15 % N
total nitrogen
0.020 % B
boron
- 4.5 % NO3-N
- nitrate nitrogen
0.030 % Cu
copper*
- 10.5 % NH4-N
- ammonium nitrogen
0.075 % Fe
iron*
10 % P2O5
water-soluble phosphate
0.050 % Mn
manganese*
15 % K2O
water-soluble potassium oxid
0.001 % Mo
molybdenum
2 % MgO
water-soluble magnesium oxid
0.010 % Zn
zinc*

* = EDTA chelated

Application fields:
- ornamental plant growing: For all bed and balcony plants, pot plants and transplanted cultivations
- for young vegetable plants and for maintaining the supply of P2O5
- nurseries: For container cultivations


Dosage:
- ornamental plant growing: for all bed and balcony plants (pelargonias, petunias, salvias, tagetes) and for pot plants such as pointsettias, begonia elatior, primulas, hydrangeas, kalanchoe. Depending on the stage of growth: 0,5 - 2 ‰ ( 50 -200 g/100 litres water)
- fertirrigation: 0,6 - 0,8 ‰.
- the ideal fertilizer for market-gardens with a variety of cultivations.


EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1,5 ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,8 1,5 2,2 2,9 12 46 75 149

Packing:
25 kg plastic sacks. Keep dry!

FERTY® 4 White 8+16+24 (+4)
Ferty 4

FERTY® 4 is a PK accentuated fertilizer without ballast, physiologically slightly acid effect. For introducing blossom formation and fructification 




Macronutrients:
Trace-elements:
8 % N
total nitrogen
0.020 % B
boron
- 2.5 % NO3-N
- nitrate nitrogen
0.030 % Cu
copper*
- 5.5 % NH4-N
- ammonium nitrogen
0.075 % Fe
iron*
16 % P2O5
water-soluble phosphate
0.050 % Mn
manganese*
24 % K2O
water-soluble potassium oxid
0.001 % Mo
molybdenum
4 % MgO
water-soluble magnesium oxid
0.010 % Zn
zinc*

* = EDTA chelated

Application fields:
- for the change over from the vegetative to the generative phase and for fertilizing at fixed periods


Dosage:
- most important fertilizer for initiating the blossom formation of heather and azaleas: 1- 2 ‰ ( 100 -200 g/100 litres water)
- flowering fertilizer for cyclamens, gerberas, pelargonias, primulas : 0,5 - 2 ‰.
- vegetable growing: For the initial fertilizing of young plants: 2 ‰, reducing hazardsin the early stages of growing (e.g. transplantation shocks) and increasing frost resistance.
- ideal for final fertilizing in nurseries, especially for container plants with a good nitrogen supply.


EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1, ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,7 1,3 1,9 2,5 11 42 68 129

Packing:
25 kg plastic sacks. Keep dry!


FERTY® 5 6+36+20 (+2)
Ferty 5

FERTY® 5 is a fully water-soluble mineral nutritive with a nutrient content of 64% and a crystalline structure. Without ballast. Physiologically acid effect.


Macronutrients:
Trace-elements:
6% N
total nitrogen
0.020 % B
boron
- 0.1 % NO3-N
- nitrate nitrogen
0.030 % Cu
copper*
- 5.9 % NH4-N
- ammonium nitrogen
0.075 % Fe
iron*
36 % P2O5
water-soluble phosphate
0.050 % Mn
manganese*
20 % K2O
water-soluble potassium oxid
0.001 % Mo
molybdenum
2 % MgO
water-soluble magnesium oxid
0.010 % Zn
zinc*

* = EDTA chelated

Application fields:
- for high amounts of nitrogen in substrates and for boosting the bud and bloom formation.

Application:
- for heather and azaleas, for periodical fertilizing of hydrangeas
- for blossom formation (according tto the cultivation and the stage development): 0,5 - 1 ‰ ( 50 - 100 g/100 litres water).


EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1,5 ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,6 1,1 1,6 2,1 9 35 60 99

Packing:
25 kg plastic sacks. Keep dry!


FERTY® 6 10+40+10 (+2)
Ferty 6

FERTY® 6 is a phosphate accentuated fertilizer without ballast, physiologically acid effect.




Macronutrients:
Trace-elements:
10 % N
total nitrogen
0.020 % B
boron
- 1.1 % NO3-N
- nitrate nitrogen
0.030 % Cu
copper*
- 8.9 % NH4-N
- ammonium nitrogen
0.075 % Fe
iron*
40 % P2O5
water-soluble phosphate
0.050 % Mn
manganese*
10 % K2O
water-soluble potassium oxid
0.001 % Mo
molybdenum
2 % MgO
water-soluble magnesium oxid
0.010 % Zn
zinc*

* = EDTA chelated

Application fields:
- starter for young plants
- boosting the root formation

Dosage:
0.5 –2 ‰ (50 –200 g/100 l water); depending on development status, species and soil analysis; in case of leaf fertilization max. 0.5 ‰


EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1,5 ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,6 1,1 1,6 2,1 9 36 61 100

Packing:
25 kg plastic sacks. Keep dry!





FERTY® 8 Yellow 20+0+16 (+2)
Ferty 8

FERTY® 8 is a NK fertilizer without ballast, physiologically slightly acid effect. Without phosphate and therefore suitable for soils, compost and substratums with an inherent high phosphate content.





Macronutrients:
Trace-elements:
20 % N
total nitrogen
0.020 % B
boron
- 9.2 % NO3-N
- nitrate nitrogen
0.030 % Cu
copper*
-10.8 % NH4-N
- ammonium nitrogen
0.075 % Fe
iron*
- % P2O5
water-soluble phosphate
0.050 % Mn
manganese*
16 % K2O
water-soluble potassium oxid
0.001 % Mo
molybdenum
2% MgO
water-soluble magnesium oxid
0.010 % Zn
zinc*

* = EDTA chelated

Application fields:
- ornamental plant growing: for transplanted cut flowers such as chrysanthemums, roses, carnations as well as pot plants with a good supply of phosphate.

Application:
- ornamental plant growing: Cut flowers and pot plants according to stage of growth and size: 1 - 3 ‰ solution (100 - 300 g/100 litres water) once or twice every 10 days.
- leaf fertilizing: 1% solution to be sprinkled over the whole plant but not the blossoms!
- fertirrigation: 0,5 ‰
- vegetable growing: Radishes: 1 - 2 ‰; lettuce and cucumbers: 0,5 (5-6 litres/m²).


EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1,5 ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,8 1,6 2,4 3,1 14 59 106 183

Packing:
25 kg plastic sacks. Keep dry!


FERTY® 9 Hydro 15+7+22 (+6)
Ferty 9

Ferty 9 is a mineral nutritive with trace elements for hydroponic and other soilless cultivations.




Macronutrients:
Trace-elements:
15% N
total nitrogen
0.030 % B
boron
- 2.5 % NO3-N
- nitrate nitrogen
0.002 % Cu
copper*
- 5.5 % NH4-N
- ammonium nitrogen
0.120 % Fe
iron*
7 % P2O5
water-soluble phosphate
0.050 % Mn
manganese*
22 % K2O
water-soluble potassium oxid
0.005 % Mo
molybdenum
6 % MgO
water-soluble magnesium oxid
0.010 % Zn
zinc*

* = EDTA chelated

Application fields:
- Special NPK-ratio and well-balanced composite of Mg, Fe and trace elements for all hydroponic and other soilless cultivations
- contains no calcium; by a water quality of more than 5,355 mmol/l acid capacity or less than 2,856 mmol/l acid capacity we recommend Ferty Basis 1.
- hydroponic cultivations with good water conditions, mineral wool cultivations, NFT ( nutrient film technique).

Dosage:
- Green plants, e.g. adiantum, bromelias, croton, dieffenbachias, chamaedoreas, ficus, philodendrons, rhoicissus, scindapsus; for flowering plants such as anthurium, saintpaulias, spatiphyllum; for young plants and salt-senitive plants such as adiantum: 0,5 ‰ (50g/100 liter of water)
- during the main period of growth, at medium or low salt sensitivity and by higher nutrient requirements: 1 - 1,5 ‰.
- postfertilizing: during the summer every 3-4 weeks, during the winter every 6 weeks.
- it is recommended to check the pH-value at regular periods and to renew the nutrient solution every 6 months.


EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1,5 ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,7 1,3 2,0 2,6 11 48 85 140

Packing:
25 kg plastic sacks. Keep dry!





ully water-soluble mineral nutritive with trace elements for hydroponic and other soilless cultivations.

Composition:


Trace Elements:

15 Total Nitrogen:
0,030 % B Boron (B)
- 10,0 - nitrate nitrogen

0,002 % Cu Copper (Cu)*
- 5,0 - ammonium nitrogen

0,120 % Fe Iron (Fe)*
7 water-soluble Phosphate
0,050 % Mn Manganese (Mn)*
22 water-soluble Potassium Oxide
0,005 % Mo Molybdenum (Mo)
6 water-soluble Magnesium Oxide
0,010 % Zn Zinc (Zn)*




* = chelated as EDTA

Properties:

Special NPK-ratio and well-balanced composite of Mg, Fe and trace elements for all hydroponic and other soilless cultivations. Contains no calcium. By a water quality of more than 5,355 mmol/l acid capacityor less than 2,856 mmol/l acid capacity we recommend our FERTY BASIC 1 Fertilizer.

Operational possibilities:

Hydroponic cultivations with good water conditions, mineral wool cultivations, NFT ( nutrient film technique).

Application:

Green plants, e.g. adiantum, bromelias, croton, dieffenbachias, chamaedoreas, ficus, philodendrons, rhoicissus, scindapsus; for flowering plants such as anthurium, saintpaulias, spatiphyllum; for young plants and salt-senitive plants such as adiantum: 0,5 ‰ (50g/100 liter of water). During the main period of growth, at medium or low salt sensitivity and by higher nutrient requirements: 1 - 1,5 ‰. Postfertilizing: During the summer every 3-4 weeks, during the winter every 6 weeks. It is recommended to check the pH-value at regular periods and to renew the nutrient solution every 6 months.


EC-Values in mS/cm at 25° C:

Solution for use Stock solution
0,5 ‰ 1,0 ‰ 1,5 ‰ 2,0 ‰ 1 % 5 % 10 % 20 %
0,7 1,3 2,0 2,6 11 48 85 140

Packing:

25 kg plastic sacks. Keep dry!

FERTY® Standard Nutrients

- all components are fully water soluble! -

Nutrients in %
FERTY® 1 FERTY® 2 FERTY® 3 FERTY® 4 FERTY® 5
Nitrogen (N) 20 15 15 8 6
Nitrate Nitrogen (NO3) 8,5 8,5 4,5 2,5 0,1
Ammonium Nitrogen (NH4) 11,5 6,5 10,5 5,5 5,9
Phosphate (P2O5) 7 5 10 16 36
Potassium oxyde(K2O) 10 25 15 24 20
Magnesium oxyde(MgO) 2 2 2 4 2
Trace elements:




Boron (B) 0,020 0,020 0,020 0,020 0,020
Copper (Cu)* 0,030* 0,030* 0,030* 0,030* 0,030*
Iron (Fe)
0,075* 0,075* 0,075* 0,075* 0,075*
Manganese (Mn)* 0,050* 0,050* 0,050* 0,050* 0,050*
Molybdenum(Mo) 0,001 0,001 0,001 0,001 0,001
Zinc (Zn)* 0,010* 0,010* 0,010* 0,010* 0,010*
* chelated EDTA

- all components are fully water soluble! -

Nutrients in % FERTY® 6 FERTY® 8 FERTY® 1 spezial FERTY® 2 Spezial FERTY® 9 Hydro
Nitrogen (N) 10 20 18 16 15
Nitrate Nitrogen (NO3) 1,1 8,4 6 10,5 10
Ammonium Nitrogen (NH4) 8,9 11,6 12 5,5 5
Phosphate (P2O5) 40 --- 6 9 7
Potassium oxyde(K2O) 10 16 12 22 22
Magnesium oxyde(MgO) 2 1,5 2 4 6
Trace elements:




Boron (B) 0,020 0,020 0,020 0,020 0,030
Copper (Cu)* 0,030* 0,030* 0,030* 0,030* 0,002*
Iron (Fe) 0,075* 0,075* 0,075* 0,120** 0,120**
Manganese (Mn)* 0,050* 0,050* 0,050* 0,050* 0,050*
Molybdenum(Mo) 0,001 0,001 0,001 0,001 0,005
Zinc (Zn)* 0,010* 0,010* 0,010* 0,010* 0,010*
* chelated EDTA
** chelated DTPA+ EDDHA

Electrical conductivity measured in mS/cm at 25°:

Product 0,5‰ 1‰ 1,5‰ 2‰
FERTY® 1 0,8 1,5 2,3 3,0
FERTY® 1 spezial 0,8 1,6 2,3 3,0
FERTY® 2 0,7 1,4 2,1 2,7
FERTY® 2 Spezial 0,7 1,4 2,0 2,6
FERTY® 3 0,8 1,5 2,2 2,9
FERTY® 4 0,7 1,3 1,9 2,5
FERTY® 5 0,4 0,8 1,2 1,6
FERTY® 6 0,3 0,7 1,0 1,4
FERTY® 8 0,8 1,6 2,4 3,1
FERTY® 9 Hydro 0,7 1,3 2,0 2,6

Please mind:

We measured the EC-values in fully de-ionized water without an electrical conductivity of its own. When determining the EC-value of your fertilizer solution, you must take the EC-value of the water used into consideration.
The EC-value does not give any information about the composition of a nutrient solution.